Exhibiting Collection:

WEEK 16:

5-11th June

 

Advertisements

Final Evaluation:

WEEK 15:

29-4th June

I have been encouraged to let myself be more open-minded and contextual based when it comes to looking for influence in my projects opposed to responding to only visual aids. This teaching has had a serious impact on my thought processes when it comes to Art, thus my basis for influence for this project has developed from more relevant issues within the world, leading to a rich and sundry amount of possibilities in my design. This subsequently impacted my sense of involvement within these issues and opening my eyes to the problems alongside raising awareness on the issues too. This has provided me with a stronger sense of ownership of my work. The exploration of concepts and how to channel this within my work has revealed many possibilities for development consequently preparing me for my next stage as an undergraduate.

My proposition for this project I decided to look into the mankinds way of life today, the pollution and litter (Modernity) and how these subjects are essentially engulfing and suffocating nature. I had hoped to develop and extend my skills in textiles, installation and also film. I have integrated textiles and installation into this project but unfortunately not film. I have gained numerous technical skills including felting, weaving, garment construction, machine skills, printing and finally translating a two-dimensional design into a three-dimensional outcome. The proposal has encouraged me to really push myself out of my comfort zone as I decided to use a conceptual influence, and I feel I have achieved a significant amount of learning and work throughout my project. I have succeeded in experiencing new processes and techniques and have improved planning of time using a work plan to ensure I made good use of my time by planning and organising.

To gather my research I used the internet to firstly educate myself on various sorts along with the issues of pollution, in history and today- and most importantly what is being done on the matter. I felt it was important to fully explore this aspect and contain this knowledge as I knew it would enable me to pay attention to detail within my work, and really dig into the concepts behind my creations. I did, however, watch film screening about the Chernobyl Disaster, I indulged so deeply into the movie it really affected me personally and really kickstarted the ambition in my project. I also visited an exhibition where they displayed recycled plastic bottles to create beautiful light shades, this also helped with my project as it gave me hope that designers are concerned about our way of life today.

At times I was not happy with the development of my work when a process did not develop as I had anticipated or a design came out wrong, I felt disappointed however this is where I would change my ideas slightly to ensure I made use of the problems and liked the next outcome. I have developed my ideas though trying out little experiments that have been inspired by my research and took the next step from there. As my work developed I ensured my project as a whole adapted to it.

My artist research played a big part in my overall project, and even through to my final piece. None of my chosen artists was fashion based, however, I feel due to this it allowed me to be more flexible at the beginning of my project and explore different stances and areas of art including sculpture and installation type work, then transferring this into then fashion related work (however difficult) then proved to be the right decision as the work inspired by my artists was so innovative and different yet fit the concepts of my project really well.

My chosen artist also inspired me to use more innovative and obscure materials within my work such as vegetation or women’s cosmetics, once I had completed the samples of work inspired by then- I still had the urge to be experimental within my work, such as creating patterns through the use of petrol, combined with water, oils and food colourings. This I felt was really successful as the patterns generated were so on point and couldn’t get any closer to ‘water pollution’. I also experimented with different textile processes such as weaving, printing, melting, however, the one that deemed most successful was the felting, thus I used it in my final piece.

I feel though out this project my skills have really been pushed this project, in terms of learning so many new processes, ways of thinking and especially keeping track of time. In previous projects, i have really struggled to prioritise my time efficiently and this has resulted in not completed it in time due to deliberating on possible ideas for too long rather than just getting stuck in. Forcing myself to work off a work plan, however, and writing up my week every week has helped me massively.

In this project, I am sorry the practical element ended when it did. I feel my project still has considerable potential for a much larger collection that I would have loved to complete.

After the sample of felt, I created in week 7 and referring back to it when thinking about creating a final garment I knew I had re-created it again, thus I did. My final garment is made from large sheets of wool that I felted together, yet infused other samples of natural materials in such as raw greasy sheep wool, cotton, vegetation juxtaposed with litter/pollution I picked up and washed from the streets of Bolton. I used this contrasting combination, and the amorphous oversized engulfing shape and silhouette of the garment as a hope to illustrate my original proposal that mankind’s way of life today, the pollution and litter (Modernity) and how these subjects are essentially engulfing and suffocating nature. I wanted to ensure the garment covered the model’s mouth and nose, similar to the smog mask fashion as well. Looking at the photographs, and the fact my model nearly passed out when wearing the garment proves it works.

Overall I am happy with my final piece and am proud of my work and innovative ideas and concepts behind the garment. However looking at the exhibition- I don’t feel as proud as I should be- there is still room for improvement such as more garments, to make a collection? Or an interactive video alongside the garment? Maybe leaflets or a lookbook of my model wearing the garment in a location shoot.

 

 

Photoshoot:

WEEK 13:

15-21st April

Today was the day of the photoshoot. I arrived in the studio at 9 am, and reminded the photography technician -Neil- I was here. He said he would help me set up lighting- but to do so I needed to tell him exactly what I want. I walked him through my project and told him what I was hoping to achieve in this photoshoot. I told him that I felt a dark background, dramatic photo shoot that contained shadows and contrasts would create the perfect images that tie in with my project. The subject of Modernity- pollution and humans way of life today entwining and essentially engulfing nature is not a light subject and rather deep threatening issues that should constantly be at the back of people’s minds- thus ensuring the photoshoot was similar this would work.

He set up the studio and I called my photographer -Zahraa- and model -Leila- down.

I had previously spoken to Leila and informed her on what she would be wearing and asked her if possible, please could she wear natural makeup and her hair in a low ponytail. Due to the fact the skirt was sheer, I decided to bring some pink tights with me for Leila to wear so she didn’t feel uncomfortable. She got dressed whilst Zahraa spoke to Neil about some lighting issues. Finally, we got to work taking pictures.

All was going as predicted, until after only a short while unfortunately Leila -the model- started feeling uncomfortable, her face was drained of colour and couldn’t stand up properly. The bright lights combined with the warmth of the felted cape was suffocating her and she nearly fainted! I and Zahraa rushed her to the bathrooms, gave her her old clothes, cooled her down with wet towels and gave her lots of water to drink. She begged us she was now fine and could carry on but I insisted she must- I already felt guilty enough as it was. She apologised and we sent her on her way.

Due to the fact we had only got about half way through the shoot, and there were no other models around I could use, Zahraa stepped in place. She gave me a quick tutorial on how to use the camera and set up the lighting again to ensure she doesn’t get so hot too and we I truly feel this photoshoot really makes the garment look so incredible, the different poses, angles, shots got back to work. I am so thankful for Zahraa stepping in like that and really proud of myself too for being able to take the photographs with no experience before!

After taking loads of pictures, I selected the ones I wanted Zahraa to edit. She did an amazing job and now I just have to print my favourites off and display them in the exhibition!

 

I truly feel this photoshoot really makes the garment look so incredible, the different poses, angles, shots everthing works so well together.

The Making Of The Top Half:

WEEK 12:

8-14th April

Now I had got the making of the bottom half of my outfit out of the way, and my World of Wool order had come through, I decided to get on with the making. I wasn’t sure how long the process would take me, so I allocated myself the whole week of the 8th – 14th, to ensure I have enough time before the deadline, and my photoshoot.

To work out and estimate how many sheets of felting I needed I made the decision to measure someone to get figures on the distance between their nose and chest, ear and chest, shoulder to stomach, and the width of their shoulders. I have documented this process below:

I worked out I would need roughly 6 big sheets of felting to create the cape.As I had previously carried out the technique of felting in my early research and experimentation ( here ) I could set up my space, and get on with work immediately, as I was just carrying out the exact same process- but on a larger scale, I did however didn’t want these felted pieces to be as polished off as the first one I created, I wanted the felting to be a little more wooly as I felt it would look more natural and help the litter entwine with it more.  As presented below, there was no order to the process and I wanted the litter to combine with the wool, natural materials and vegetation as seamlessly and as naturally as possible (this is the stage before I felted it together).

IMG_4978.jpg

After a long day few days of work, I had finally completed the felting. I let it dry for 2 days, as they were thick they needed this. Once I had completed the felting pieces and they had dried before I stitched them together I would pin them on a model, take it off, then stitch.

So far I am extremely happy with how the garment is looking- the amorphous shape and the way it is drowning and covering the model is exactly how I pictured.

I decided to sew this piece randomly, with little bits on hand stitching and then normal stitching to give it the fluidity and volume I desire. I could not be happier with the results of this (images to come)

Screen Printing & Making Of The Skirt

WEEK 12:

8-14th April

Due to the fact I had already screen print before- just using the Devore technique, I already had a prepared screen that I was able to use.

I had already purchased my 100% cotton muslin fabric that I was going to print on, however like the velvet I had used for my previous printing sample, it would not stick to the pre-gummed tables as it was too sheer. This meant I had to iron on cotton sheeting to the desks, starting from the centre outwards to discard and eliminate any creases in the sheeting, this meant that once my muslin was pinned to the sheeting, it wouldn’t move around or create any unwanted bumps- the flat smooth surface ensures a cleaner print.

As stated previously I wanted the majority of prints to be different shades pink, this is because I feel it is a running colour through my project now that initially started off with my artist Karla Black as she tends to use these colours within her work too. I did also want to include a darker colour such as a blue-grey and a metallic colour to tie in with the top half of the outfit, and due to the fact oils spills in the actual sea and other water pollution tend to be metallic and dark colours- and due to the fact this is where I generated the patterns from with that idea in mind and polluting water with petrol myself, I feel it would tie in the whole look and ideas together, along with creating more depth, contrast and texture to the prints.

With the help of Danielle my textiles pathway tutor, I picked out three pink colours of pink  ‘Scarlett’ ‘Red’ and ‘Fushia’ then I mixed ‘Blue’ and ‘Grey’ together with white, to create a light blue-grey colour. I mix a tiny amount of these pigments in with two scoops of print paste (binder) as a base. This dries clear. I also decided on a metallic rose gold colour to use in a few prints, this, however, doesn’t need to be mixed with anything and goes on its own.

Due to the fact, I am being conscious of my placement of the prints, and there are 4 different prints on my screen- I need to use newspaper and masking tape to mask off the patterns I don’t want to use, and only have one showing, meaning only one of the 4 patterns prints at a time.

The composition I am going for as discussed earlier in my Skirt Design Evaluation is lots of pattern and depth at the bottom with the darker colours concentrated there, and fading on the way up. Thus this is what I did, my aim was to do this, yet still, ensure the fade looked natural. As I want depth in the skirt, I also was advised to on some prints pull the pigment through 3 times, to gain a thicker more bold pattern, and some just once to achieve a thinner more delicate pattern.

Once I had done my first lot of patterns in the first colour, I had to wash the pigment off, and mask this pattern off whilst revealing a different one. This whole process of washing, masking and painting took me a full college day. I left the skirt overnight to dry and picked it up the following morning.

I decided to add the belt to the skirt at home, as I was more familiar with my machine and knew I could get it done straight away without messing it up. Finishing up the skirt was really simple, as I wanted to keep all the edges raw and have the back opening all I had to do was pin the top of the outside of the skirt to the inner about 2 inches down and stitch, then thread my tubing through and secure with a knot!

I am so happy with how this garment has turned out and I personally feel the patterns look really effective.

I will take clearer images in my photo shoot.

Designing A Final Outfit: Bottom Half

WEEK 10:

24-30th April

Although the jumper was the main priority for me, I also wanted to create something to go with it. This I knew would be a skirt due to the fact when I pictured the jumper in my head I visually paired it with a long flowing skirt that contained patterns. I knew they would compliment each other straight away and this is what I went off when I started designing the skirt. Below is the template for my designs that I hand drew. Though my illustrations aren’t usually true to life, I felt this one had to be so I could really visualise the skirt on a model. This skirt is really simplistic, just one piece of fabric with a belt stitched in. I had some clear tubing and this is what I visualised the belt would be.

Below I have documented my developed designs. To create them I uploaded the template to Photoshop, used the ‘Polygon Laso’ tool to select the inside of the illustration, then ‘cut’ a photograph I had previously taken, selected ‘paste special’ then ‘paste into’. Then adjusted the photograph accordingly. Then using the transform tool, I adjusted the size, and placement of the pattern and repeated this until I had 4 designs using the same pattern.

For these first 8 designs, I did this but then using the transform tool I adjusted the size, and placement of the pattern and repeated this until I had 4 designs using the same pattern. As you can see the first 4 are the pattern I generated from my oil/water pollution images, and the second 4 is the pattern I generated from the dead flowers.

IMG_6117IMG_6118

These 8 designs I do like, however, I felt they were a little too predictable and boring with not enough colour. Thus for rest of the designs, I decided I will add colour.

For the next lot of designs, I did the same again but with the actual photograph of the oil/water pollution experimentation, I conducted, and then also changed the ‘contrast’, ‘saturation’ and ‘lightness’ on each design.

IMG_6119

I feel these designs would work really well, and I especially like the second as It looks really interesting and I love the colours however I feel the colours are too bold and would take away from the jumper.

For these next 13-16 designs below, I decided to tone it down a little, and go back to the beginning and incorporate my Karla Black inspired images. These I feel are the most successful so far- however still not what I wanted.

IMG_6120

I decided to get a little more creative with my design process and the Photoshop tools I had available. I decided to layer up two images for this set of designs, the flowers and the pattern generated, but moved apart so I created almost a 3D effect:

rose .jpg

And then on each design adjust the setting, soft light, overlay and hard light. The last one of these designs is my personal favorite so far- however thinking back to how I wasn’t happy with the projections of the patterns on a larger scale, I took it back down to smaller sizes, and to do so I decided I would create an image where I incorporated all my favorite designs and use this on the rest of the designs. I made sure the image wasn’t too bright and overpowering, and the patterns included small and medium sizes.

IMG_6123

I then created this image below:

pp (1)

by layering up different patterns I had saved, then edited this image into the templates and adjusted these following tools on each one to get the desired outcome:

  • Size
  • Placement
  • Saturation
  • Lightness
  • Exposure
  • Hardlight
  • Softlight
  • Overlay

IMG_6124IMG_6125IMG_6126

More Pattern Making:

WEEK 9:

17-23rd April

I felt like the flowers I had found on the floor of my garden I hadn’t put to use enough. They were so beautiful even though dead, and I felt I could create some really interesting patterns from them. As I really liked the acetate images of the water pollution creation I decided to also somehow print these onto acetate. To do so I simply sandwiched them between two pieces of acetate and scan them in and print them off this way. This way they looked super realistic and I could arrange them however I wanted. Due to the fact the background was a dark grey colour and almost took away from the beauty of the flowers- I uploaded them to photoshop and used the ‘Polygon Lasso’ took around the image, pressed ‘select- inverse’ and deleted the background so I was left with a crisp white background that made my image a lot easier to work with. I decided to generate a pattern from this image by simply tracing around it with a black pen. The results I absolutely love and I feel would look really effective as a screen print. This process I will look into in the near future.

I decided that the pattern could use a little colour so layered it on top of the artist inspired image I created (Karla Black) and I felt the pinks worked really well with the flowers. I also feel the dead flowers paired with the water pollution patterns will create a bold statement- and illustrate how pollution is essentially killing nature and its beauty. This combination I will also look into.